Hilmar Slipway Trailer
HST 10 & HST 15
The Hilmar Boatlifting hydraulic boat trailers are designed to launch and recover boats on a slipway, transport the boats over land and park them in a storage area. The Hilmar Boatlifting SW10 and SW15 can be pulled by a reach truck or an agricultural tractor. It uses the hydraulic facility of the pulling device for all the hydraulic functions. The boat is lifted by 2 hydraulic or mechanical pads with soft pads on them to avoid damaging the hull. The front of the boat is supported by the crossbeam with also a soft pad on it to avoid damage. For sailboats a adaptor is available. The width of the trailer frame and the height are hydraulic adjustable. The pads and drawbar are manually or hydraulic adjustable.
The Hilmar Boatlifting HST10 and HST15 are also suitable for transporting boats on T-cradle’s. Because off the solid (with comfort) or air tires the HST10 and HST15 offers optimal comfort through any terrain capable of carrying the load. A further advantage of the HST10 and HST15 are that not every boat needs to be placed on a cradle. Many boats can be placed on studs. This offers you a chance to save a lot off money on storage material.
Frame: Open U-designed frame with adjustable width, height and length.
Wheels: 4 pneumatic or 4 solid tires.
Drawbar: 1,0 mtr. extendable.
Pads: 2 polyurethane pads 930x320 mm.
Hydraulic cylinders: High quality cylinders with safety valves build-inn.
Paint system: 2 coats epoxy primer and 1 coat 2 component topcoat, RAL 9001.
Height on pads, 750 mm.
Height on front, 430 mm.
Distance between centre of pads, 1200-2000.
Lifting height frame, 700 mm.
Lifting height pads, 400 mm.
The Hilmar Boatlifting HST10 and HST15 are built according to CE-regulations and are tested at the factory before shipment.
HST10 - 10.000 kg
HST15 - 15.000 kg.